We have highly sophisticated LAB and field testing & commissioning equipment.

Our engineers will provide you the highest quality and accuracy in all testing and commissioning activities with our top class test equipment!

csm_CMC-356-keyvisual_74a3c4a1b4

OMICRON CMC 356 Secondary Test Set

The CMC 356 is powerful and practical device for testing all generations and types of protection relays. It is a universal tool for substation commissioning and it commonly used as power system simulator for various cases.

csm_CPC-100-keyvisual_aceb310def

OMICRON CPC 100 Primary Test Set

Testing device for performance checks through primary injection. Used for testing CTs and VTs and a wide range of frequency selective measurements, and to determine numerous transformer parameters, eg. ratio, burden and polarity.

csm_CIBANO-500-keyvisual_3f76648cc8

OMICRON CIBANO 500 Breaker Analyzer

3 in 1 test system which enables all standard tests to be carried out on medium and high-voltage circuit breakers (with live and dead tank design).

csm_CT-Analyzer-keyvisual_6db935649c

OMICRON CT Analyzer

The CT Analyzer is used for testing metering and protection current transformers, including those with transient behavior. It can also be used for calibration of instrument transformers and testing all essential parameters. The CT Analyzer automatically evaluates current transformers according to the IEC and IEEE.

csm_CMGPS-588-keyvisual_692271f204

CMGPS 588 – GPS Receiver

The CMGPS 588 synchronization unit is an antenna-integrated GPS controlled time reference.

The CMGPS 588 can be used for operating CMC test sets with a NET-1B/C interface and the Test Universe 3.0. It supports the following applications:

  • Synchronizing the starting point of a test procedure including two or more OMICRON CMC test sets
  • Synchronizing the recording with real-time stamping of measurement samples
Megger MIT1025 10 kV

MIT1025 – 10Kv Diagnostic Insulation Resistance Tester

Light 10kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. As well as measuring insulation resistance to 20 TΩ, the MIT1025 also offers various diagnostic tests such as Polarization index, Dielectric Absorption Ratio, Step Voltage, Dielectric discharge and ramp testing.

GW Instek

MDO-2074E – 200/100/70MHz Mixed-domain Oscilloscope

The GW Instek MDO-2074EX is a versatile combination instrument: it’s a mixed-domain 4-channel 70MHz oscilloscope that includes a built-in spectrum analyzer to display the frequency domain, as well as a 2-channel arbitrary waveform generator, a 5,000 count DMM, and a 5V/1A power supply. The first of its kind, MDO-2074EX is the only oscilloscope to provide a space-saving combination of all these instruments, making it ideal for educational or space-restricted use.

FLUKE 8846 A 120V

FLUKE 8846A/SU 6.5 Digit Precision Multimeter

The Fluke 8845A & 8846A 6.5 digit DMMs feature a unique dual display that allows you to measure two different parameters of the same signal from one test connection. To reveal signal quality issues like drift, intermittence and stability, view data as a real time trend plot or histogram, with the unique analyze mode.

HILConnected

Typhoon HIL Connect – Real-time emulator with HIL602+

To completely test, verify, and certify your power electronics controller in hardware-in-the-loop configuration it is critical that the controller under test is not modified in any way. Controller has to “feel” that it is controlling the real converter hardware, meaning that all the current/voltage/optical I/O interfaces have to behave as the real power stage signals.
With 20 ns PWM sampling time, down to 500 ns simulation time step, and ultra-low latency, 6 Series processor has set the industry standard for ultra-high fidelity real-time emulation of power electronics systems.

FLUKE 435-II Three phase power Quality Analyzer

FLUKE 435-II Power Quality and Energy Analyzer

The Fluke 435-II products are designed for users who need to get to the solution of the power quality problem as quickly as possible so that they can minimize expensive downtime. The measurement process and display of data is optimized to get to the most important information as quickly as possible.

FLUKE DSX-600

FLUKE DSX-600 Cable Analyzer

The DSX-600 provides essential Cat 6A and Class EA Copper Certification featuring 10 second test times and advanced user interface. Manage jobs and testers from any smart device over Wi-Fi with LinkWare™ Live. Features legendary Fluke Networks reliability backed by worldwide support.

FLUKE VT04

FLUKE VT04A Visual IR Thermometer

Compact and intuitive visual IR thermometer that blends a visual image with infrared heat map overlay
Features NEAR and FAR mode that automatically aligns visual and thermal lenses to correctly locate issues
Includes a center measurement box showing the exact area of temperature measurement on the screen.

FLUKE 787 Processmeter

FLUKE 787 ProcessMeter Digital Multimeter

DMM and a loop calibrator in one rugged, handheld tool
Provides a precision 1000 V, 440 mA True-RMS digital multimeter designed to meet 1000 volt IEC 1010 CAT III standards.
Features a clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
Performs frequency measurements to 20 kHz.

World top class test instruments and equipment. Safety, durability and precision is demonstrated in critical power industries infrastructures.